Jump to content


SMBulls9

Member Since 14 Jun 2009
Offline Last Active May 27 2011 05:06 PM
-----

Topics I've Started

EBlade BB Eyes

04 September 2012 - 07:53 PM

I'm looking to buy EBlade BB Eyes for a WGP Sutococker SR. Does anybody have any or have a link of where to purchase?

WGP Autococker SR Eyes

27 May 2012 - 11:46 PM

Before I start, I apologize for the length. I'm just trying to be thorough. I recently acquired a WGP Autococker SR from a friend and have been trying to fix it and get it up and running, The main problem was it was chopping paint like crazy because the eyes didn't work so you had to use it with the eyes turned off. I cleaned it several times but it still didn't work. You could tell because when there is nothing in the path of the eyes, the LED on the board is supposed to blink. Also it was shooting like every three seconds. I inspected the photo eyes and saw that one of them was burnt out. I used a voltmeter to make sure the board was giving off the correct output and it read 3.2V which I would imagine anywhere between 1V and 3.5V is fine. So I just ordered new eyes. I got Kingman Spyder eyes because I saw that WGP parts are very similar to Kingman according one of Mike's video and on account WGP is out of business. However, when they arrived, they weren't flat eyes, they were the kind as if it looked like an LED was at the end so they stuck out into the chamber of the marker. By the way, when I turned it on it worked because the LED started blinking. When I tried to move the eyes back the receiving break beam eye wouldn't pick it up so it stopped blinking (which I find kind of weird since all paintball guns have roughly the same bore give or take a tenth unless these eyes were meant for a marker where the eyes are lower in the chamber). Anyways, I'm trying to find eyes for this gun. Does anyone know where I can get something that will work. Thanks a lot in advance!

Why are some feednecks not able to fit hoppers?

22 May 2011 - 02:31 PM

I have this paintball gun and the stock feedneck for on it doesn't fit any of my hoppers that I've ever had (V-Force, V-Force w/ eyes, the Eggy, Halo) because its too small (the feedneck) so I'm trying to sand it down because I don't feel like buying an aftermarket one. My question is does it really cost that much for the manufacturer to make a feedneck with a slightly larger inside diameter? It's not like the Spyder feednecks where it's just a straight knob, it actually looks like they tried to make it functional. I have an e-Rex Elite and I don't think the manufacturer (Rex paintball and Game Face paintball) even made aftermarket feednecks so what's the even the point of this stupidity?

How do I cap my board

07 May 2011 - 06:54 PM

Hi, I have an E-Rex Elite and I'd be surprised if anybody new what it is but I have a problem. I know for a fact that I am rocking faster than the gun is shooting because I rock the trigger when it's off and I know that it's holding back. Does anybody know if it's possible to change the max rate of fire on this marker?

How do I cap my board?

07 May 2011 - 03:56 PM

Hi, I have an E-Rex Elite and I'd be surprised if anybody new what it is but I have a problem. I know for a fact that I am rocking faster than the gun is shooting because I rock the trigger when it's off and I know that it's holding back. Does anybody know if it's possible to change the max rate of fire on this marker?