Jump to content


Member Since 16 Jun 2009
Offline Last Active Oct 29 2011 10:43 PM

Topics I've Started

making my own phantom pump handle?

12 August 2012 - 09:23 PM

so I recently purchased a used phantom, and while I'm anxiously waiting for it to get here, i decided i wanted to buy a cci/wevo UC kit but make my own handle because i dont particularly like how the cci handle looks. so i have a few questions:

  • i went on mcmaster to look at delrin, but i have no idea which type to get! help? mcmaster <<<<< link
  • i need to know what tools ill need and what size taps ill need for pump threading etc
  • What should the diameter of the delrin be?

Any ideas suggestions and help would be greatly appreciated!

Proto Pm5!

05 August 2012 - 02:27 AM

Condition: 6.5/10 due to a few nicks
color:olive green, with purple barrel
Upgrades: ccm feedneck, aftermarket trigger,pm6 back cap,SP mini drop forward and proto on/off asa, and a STD Industry lpr
Known Problems: may leak through the macroline fittings when you first air it up, not really a problem, you just need to wiggle the macroline and it will stop.
Asking Price: $ 150 OBO
shipping options:USPS
trades of interest:CCI Phantom
Location of Item: Depue, Illinois
What's included: the marker and barrel, original back cap, two sets of proto grips and a set of contract killer grips ( attached), and a small bag of orings, which also contains some detents and a couple small parts as well as some dye lube.

I received this marker in a trade a while back, and never really got to use it. I lent it out to someone at the field once and have shot it in my backyard a couple times and it functions fine. looking for some cash to buy a new phantom!
As of right now I can not accept paypal. I do not have paypal, but I will ask a family member who has it if they will allow me to use it, ( which I am sure she won't mind) But until further notice paypal will not be accepted.

Edit: I do now accept paypal!

Posted Image

Below are pictures of the major cosmetic blemishes. There are some less significant scuffs not pictured, but I could not get them to show up on my phone camera.
Posted Image
some nicks on the lpr

Posted Image
The feedneck shows some wear, and a previous owner left some of the adhesive they attached it with visible

Posted Image

there are also a couple scratches shown above on the hpr

Offer up, and thanks for looking!

Azodin kaos detent cover screw hole is stripped

18 January 2011 - 06:25 PM

I recently received an azodin kaos used. The hole that the screw hole that would keep the detent cover on is stripped. I don't have a tap and dye set. how can I fix it?

silver vsc phantom fs/t

26 December 2010 - 08:22 PM

sold. mods please close
I can only accept money orders.

Marker: Cci Phantom vsc

Condition: 6.5/10
Color: silver
Upgrades: left feed body, bottomline kit, frantom barrel, detent rings, clear pump, feedblock, and feed cap
Known Problems: cracked feed block, rubber hardline gasket stuck in fitting. (shown in pics below.) doesn't effect performance.
Asking Price:$265 $240 Or Best Offer
Shipping Options: USPS flat rate
Trades of interest: anything, just offer. Cash is king though.
Location of item: Depue, IL
What is Included: phantom, manual, left feed body (stock class),velocity adjuster,
frantom barrel (no freak inserts.Posted Image), extra feedcap and speedfeeds, 13 ten round tubes,
3.5 oz co2 tank and 12 oz co2 tank with anti siphon(both out of hydro), and 2 ronin gear wrist harnesses.

Posted Image

Posted Image

Posted Image

Posted Image
the cracked feed block I mentioned above. It does not affect performance at all.
Posted Image
the rubber gasket on the left side (example on right circled) is stuck under the metal fitting. Doesn't affect, performance, but does make it annoying to remove and install the hard line.
Thanks for looking!

making my phantom shoot first strike rounds

24 September 2010 - 04:20 PM

I bought some first strike rounds, and decided I want to do this to my phantom:

Posted Image
There is enough room, but just barely. What would be the best way to cut it? Should I just use a dremel with a cutting wheel?