Jump to content


MaTriX MikEz

Member Since 29 Sep 2008
Offline Last Active Oct 23 2008 10:32 PM
-----

Posts I've Made

In Topic: Dm8 prob Come Help!

13 October 2008 - 04:53 PM

thanks guys i ended up getting it out i used a redz swab after i took the bolt out to hit the back of it far enough out then got it out with my finger what jammed it was that the magnets from my old detents that i replaced where still in the breech when i put the new detents in then the magents doubled up and jammed it.

In Topic: Dm8 prob Come Help!

13 October 2008 - 12:16 AM

nothings working im pretty much screwed.

In Topic: Dm8 prob Come Help!

12 October 2008 - 11:58 PM

I had this problem when I first needed to change my eye pipe out to replace it. The trick I did was got a skinny allen key, one with a bit of "sturdiness", and what you want to do is try to slide the eye pipe out just a little bit, so there's some space between the pipe and the milling inside the gun that keeps it from going into where the bolt resides. Then you take the allen key and stick it back towards bottom back-end of the eye pipe and using the feed neck area as a sort of lever, try and push the eye pipe out towards the front of the gun, this may mess up the back part of the pipe (the skinny arch) but if you need to get it out, its sort of worth it


Hope this helps


ill gonna go try that right now thanks man

In Topic: Dm8 prob Come Help!

12 October 2008 - 11:42 PM

Pull harder? If there is a peice of the eye pipe sticking out try grabbing it with pliers.


its basically stuck in one spot moving back and forth a bit if i get it that far out i will try pliers. thanks any other suggestions post them up please.

In Topic: Dm8 shooting semi.

07 October 2008 - 11:19 PM

Nice-N-Smooth


yes sir thats why i love dye and the accuracy is amazing