Jump to content


Member Since 21 Jul 2009
Offline Last Active Sep 13 2011 03:35 PM

Topics I've Started

Initial review of the valken proton

20 September 2012 - 06:47 PM

I'm going to do an initial review of the proton.

I am an ex-owner of a 2011 Mokal Aura, While the gun shot and felt nice it did have some kinks in it that the Proton has addressed. The programming on the board was something that you would find in a $125 electronic gun and could not keep it shooting consistantly in PSP 12.5 not something that you would want to use in serious competetive play.
Also the trigger was garbage, Could not keep a steady stream with it.

I recieved my Proton today, Opening the package I was impressed with what I saw. The gun was in a cardboard box with a foam cut out for the gun, it included a parts kit with o-rings to keep the gun in service for a long time, it also included an extra set of detents and springs.

First thing I did was to play with the trigger, and I must give it to Valken, This trigger is nice, there is 0 side to side play but the pull was a bit stiff. I will be cutting down the spring a couple coils and this should losen it up a bit and keep the responsiveness needed to reset the trigger.

After I played with the trigger, I then took the front grip off and set the board up to PSP 12.5 re-installed the front grip and noticed that it was easier to align than the previous aura model, Turned the gun on and the eyes off and clicked the noid, PSP was easily kept like it is supposed to be instead of the aura where you had to walk the trigger to keep a stream.

I have a scuba tank but unluckily only had about 300 psi in it, So i screwed the tank into the ASA on the Proton. and attatched the fill nipple to my filling station on the scuba tank. Put my Vlocity jr onto the marker and adjusted the feedneck accordingly.

I put a pod of paint into my loader, turned the gun on and starting shooting in PSP 12. The gun shot wonderfully, a low sound signature ( using a deadly wind null barrel ) and very low felt recoil. I ended up shooting the scuba tank down to around 150 psi and at that point I was no longer able to get full velocity out of the Proton ( guessing around 220 fps ).

I then attatched my other tank to my infinity legend and although it was not able to get full velocity out of the 150 psi it was shooting slightly hotter than the Proton.

First impressions of the Proton are great, The marker is super light, feels great in the hands, small but yet comfortable for a big person ( i'm 6 ft 245 lbs ) very thin overall and also short. Internal air routing.Feedneck is high quality, the trigger is about the best you will find on a stock marker especially for the price Very smooth firing, low sound signature and the ASA is one of the easiest to use on the market.

The bad? there are no upgrades available for it, however I do not think that the gun needs anything.

I took a few pictures of the gun, 1 by itself and 1 comparing its size to an Infinity Legend. So here are the pictures.

Posted Image
Posted Image

3 Guns, Strange SFT Shocker, Marq 7 , Bob Long 2k5'd GZ

04 October 2010 - 05:09 PM

Marker: Bob Long Marq 7
Condition: 7 out of 10 on body, internals are great
Color: gloss black with dust red
Upgrades: Hater Board, Dye UL, Virtue grips, UL trigger modded to fit, Cam drive ASA
Known Problems: needs eyes, right side is scratched up
Asking Price: $325
Shipping Options: USPS
Trades of interest: Offer up
Location of item: texas
What is Included: Gun and barrel

Marker: Strange SFT Shocker
Condition: 8 out of 10
Color: red with pewter parts
Upgrades: Hater Board, HE bolt, Freak barrel with 693 inert, trinity feedneck, CP direct mount, CP trigger
Known Problems: none
Asking Price: $300
Shipping Options: USPS
Trades of interest: Offer
Location of item: Texas
What is Included: Gun and barrel

Marker: 2k5'd GZ Timmy
Condition: 8 out of 10
Color: black to blue with silver frame
Upgrades: marq barrel tadao board, alias frame, ironmen trigger guard, alias trigger hyper 2 reg, hybrid ram cap, XSV duckbill asa
Known Problems: needs a barb for the front block
Asking Price: $200
Shipping Options: USPS
Trades of interest: offer
Location of item: Texas
What is Included: gun and barrel

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image