Jump to content


noob123

Member Since 28 Sep 2009
Offline Last Active Apr 27 2014 10:26 PM
*****

Posts I've Made

In Topic: gog g1

27 April 2014 - 09:33 PM

is your co2 tank upside down or vertcally mounted in your pack?


In Topic: Shocker SFT Eigenbolt problem

23 April 2014 - 12:53 AM

as much as all the other ones. i check fitment and it grips the inner walls of the bolt and slides nicely. also when i put thumb over bolt face and pull guide out it creats a lot of suction so i know its sealing good


In Topic: Shocker SFT Eigenbolt problem

23 April 2014 - 12:45 AM

im going to have to keep trying that. when i put teflon in the grooves the oring seats nicely around the bolt. based on pure feel on when i move the bolt with my hand in the can it feels great. not too loose but enough to slide easily. also with the sail oring and sleeve oring and bolt guide orings. ive spent hours fitting orings and have found the best ones but still have a leak


In Topic: Shocker SFT Eigenbolt problem

23 April 2014 - 12:35 AM

nope. this is my first shocker. stock everything (can, guide, sleeve, and bolt) upgraded to eigenbolt after a ton of research to get a better experience with my shocker. but now im just waisting air. at least with the stock setup i was wasting air but putting paint out the barrel. 


In Topic: Shocker SFT Eigenbolt problem

23 April 2014 - 12:30 AM

im out of orings to try lol i have a ton of orings and none of them fit. resorted to putting teflon tape in the grooves (advice from ryan at lurkerpb) to no prevail.