Jump to content


Paintballer22

Member Since 30 Sep 2009
Offline Last Active Nov 07 2011 10:34 PM
-----

Topics I've Started

Fill Nipple Installation?

28 March 2012 - 06:39 PM

My HPAs fill nipple is leaking air so i got another one, i know i need a sealant but i dont know if what i have is sufficient. I have Teflon tape and red Loctite (242), would i need to use both or would one work?

Which burst disk do i need?

27 March 2012 - 03:55 PM

I have a old Pure Energy tank that has been hydro tested to 6750PSI. I would like to buy some extra burst disks just in case one blows. As you can see in the pictures there is a 7.5k burst disk and a 1.8k. My question is, is the 7.5k burst disk safe for the tank since my tank has only been hydro tested to 6750PSI, or should i get the 5k burst disks?
[attachment=13508:DSC00095-r50.jpg]

[attachment=13509:DSC00096-r50.jpg]

[attachment=13510:DSC00097-r50.jpg]

Halo B Feedneck Too Big For Geo 2?

18 October 2011 - 08:13 AM

Just got a Geo 2.1 and the feed neck on my Halo B is too big Posted Image. Are the new loaders out there smaller or something? And i should just take some sandpaper to my Halo B right? There's about 3 mm of extra plastic.

PM6 Techs near Lethbridge, Alberta?

16 October 2011 - 09:29 PM

I just wondering if there is any one from Lethbridge that would know how to fix a PM6 because i have a leak out the barrel and the hole of the bolt cap. I have replaced all of the orings in my bolt and it still leaks.

Geo 2.1 or v2 Victory?

10 October 2011 - 08:33 PM

I play X-ball mosty and I don't mind about efficentcy, which one?