Jump to content


Explicit Vitors

Member Since 24 Oct 2009
Offline Last Active Mar 20 2011 02:18 PM
-----

Posts I've Made

In Topic: Tampa Fields

16 March 2011 - 05:09 PM

OK thanks!

In Topic: Physco Ballistics Pump

03 October 2010 - 11:01 AM

thanks!

In Topic: Pumping at a scenario

03 October 2010 - 10:48 AM

i went to an all day scenario last weekend and shot a bag. it was castle conquest at EMR and i was an attacker. there was alot of paint flying. I say you buy a bag.

In Topic: NEED HELP ON FIRST GUN

22 August 2010 - 08:12 PM

The brand is Game Face . Basicly its like a spyder. My friend has a very similar gun. Ill try my best to help you.

SO, you look at the gun from the back. Theres a top tube and a bottom tube. in the top tube you put the long thing with the handle. thats called the bolt.
in the bottom tube you see a metal, pretty heavy cylinder like thing. thats the striker. on the bolt there should be a metal pin. you put that pin in the small hold on the top of the striker. then slide that all in the gun. push against it and pull the trigger. it will go in further. then you put the spring in the bottom tube behind the striker.then the back cap goes on with the screw in knob on the bottom. put the pin in the side to hold it all in. if you have any questions please ask.

i know a lot about these kind of markers (spyder clones) so just ask.

hope this helps


In Topic: Re-Doiing a gun inside and out

19 August 2010 - 10:58 AM

thanks a ton. how exactly would i cut that slot on the top?