Jump to content


Explicit Vitors

Member Since 24 Oct 2009
Offline Last Active Mar 20 2011 02:18 PM
-----

Topics I've Started

Tampa Fields

12 March 2011 - 09:58 AM

Im gonna be visting family in FL this august. I dont wanna go with out experiencing the florida paintball scene so I was wondering what field has an open play every weekend, is nice andfun to play at. thanks!

Tank to Tank filling?

12 March 2011 - 09:54 AM

I play pump and recently picked up a 13/3000 air tank. I also own a 72/3000 tank. I was wondering if i put the remote coil on the big tank and hooked the other end to the fill nipple of the 13/3000 would i be able to fill it off the bigger one? would it be safe? Thanks.

Physco Ballistics Pump

01 October 2010 - 07:14 PM

Hey my friend is selling me his for about 50 bucks with a reg and asa and im turning it pump for a winter project. i was wondering what parts it takes? Is it 2k+ ??? I dont want to buy the wrong pump kit. Also is it as simple as removing the phenumatics and putting on the pump kit?

Thanks for all help

Re-Doiing a gun inside and out

18 August 2010 - 07:17 PM

I have an old Pirannah (R6 i belive) that im planning to mod. I will first change it from a rear cocking to a top cocking. What im looking to do in the end is make a spump out of it possibly. What i need to do first is:


#1 - Cut a slot in the top of the upper tube for the bolt pin
#2 - De-bur the inside of the cut
#3 - pollish the inner tubes (top and bottom) for the bolt and striker
#4 - Possibly add some sort of milling
#5 - Color the marker using something (i dont know what yet)


First off, what would i use to cut through a 1/4" thick 2" long strip of alluminium?

what would i use to de- burr the inside of the tube?

what would i use to pollish the inside of the tube?

What would i use to add some milling?

What would i use to paint it?


Thanks, all help appriciated.

Adjusting the air pressure of a gun

12 August 2010 - 02:53 PM

I bought a Regulator for my Azodin KP and i was wondering what would be the best for efficiency. To put the regs pressure all the way up and velocity adjuster on back low or the oppisite?