Jump to content


Mahan

Member Since 08 Dec 2009
Offline Last Active Jan 15 2011 02:33 PM
****-

Topics I've Started

Barrel Breaking

03 October 2010 - 03:34 PM

Went speedballing yesterday, and i was getting constant barrel breaks. the weather was a little chilly but no too cold. i use an etek 3 and was getting break after break in the barrel. The stock barrels are 693. bore. The paint i was shooting was decent grade.

So anybody got any suggestions or helpful hints on how to cut down or prevent barrel breaks?

Thanks

Balls Keep Jamming in the Breach

02 October 2010 - 07:34 PM

The Title says it all today i went speedballing with my Etek 3 and balls kept getting jammed in the breech. This happened 4 or 5 times in the middle of a game my bolt would just stop cycling and after looking at it, the barrel was drenched in paint and two or three balls would be jammed in the breech. after every time it happened i would clean out the breach and the barrel, clean my bolt and it would happen again. I use an invert too and my speed setting is only at 2 so it's hard to believe my loader is putting too much tension on the ball stack.

Thanks for the help

Barrel Help! :)

08 December 2009 - 10:41 PM

hey guys, im thinkin of getting a one piece barrel for my smart parts sp-1. i was really liking the smart parts progressive barrel but im not sure if it's the right choice. Any Suggestions on what barrel i should research and/or purchase? Thanks a lot guys! Posted Image