Jump to content


Redrum012

Member Since 15 Mar 2010
Offline Last Active Dec 12 2010 10:26 PM
-----

Posts I've Made

In Topic: Mini ASA leaking problem.

12 December 2010 - 10:27 PM

Maybe the ASA is loose. My friends did that. He tightened it up and it worked fine.

In Topic: G3 Problem.

12 December 2010 - 06:35 PM

I took apart my reg again. I found out that the shim stack was messed up. I kept it just like it was when I took it apart the first time, Idk what happened. But I fixed the shim stack and it still won't shoot. So it's the solenoid?

In Topic: G3 Problem.

12 December 2010 - 06:29 PM


My G3 will not shoot. I took out the bolt, replaced all the o-rings and lubed it, took apart the reg, replaced all o-rings, and it still won't shoot. I tried turning the velocity up, and it will not go up. However, when I get to this certain point it will fire but the ball just rolls out of the barrel.

Any suggestions on what I should do?

Thanks,


first clean the noid, and relube it with dow 33 or such grease. THIN coat only. http://www.youtube.c...h?v=iw-TAvy5I6U
in that link you will be shown how to properly maintain the noid. if cleaning it and replacing orings wont work, just buy a replacement, theyre 40 dollars. very cheap compared to most.

EDIT: Also what kind of lube do you use on your g3 bolt?


I'll try that. Thanks. & TechT Gun Sav.

In Topic: What should I get?

17 March 2010 - 03:48 PM


Alright. I have $270 bucks and I don't know what to get.
Prophecy?
I also have a G3 stock parts. What upgrades should I look into.


The Dye Rotor is a great loader, as for your G3, go play with it first then ask yourself what it needs.



I've played with it and it works GREAT. Just if my reg breaks, should I get a CP reg?

In Topic: Invert Mini vs. G3

16 March 2010 - 05:15 PM

I would get the mini, it is more efficient and easier to maintain

the bolt on the g3 has its orings internalised, which make them a pain to get at.

and btw bigballa, the g3 barrel is in no way better than the mini's, they are both overbores, nuff said.


The G3 is so easy to maintain.