Jump to content


Snownd

Member Since 15 Jun 2010
Offline Last Active Apr 23 2011 04:28 PM
-----

Posts I've Made

In Topic: My beloved Geo

30 November 2010 - 07:24 PM

bump for a sweet looking gun

In Topic: Dye matrix LCD (DM3)

18 July 2010 - 09:15 AM

ok just for the update, the solenoid was soldered successfully and the main problem has been identified. The LPR o-rings were in bad shape so i was loosing air through the end that feeds into the gun making it seem like it was the solenoid. Once the o-ring kit was added the gun shot perfectly. Thanks for the help guys and firebirdjimbo, If I ever manage to mess up this bad again I might just come for your services. Mods please close out this topic

In Topic: Dye matrix LCD (DM3)

27 June 2010 - 12:25 AM

ok. well i should have made an edit on that post earlier. The wires that came off of the noid came off completely including the 2 prongs that would be on a stock solenoid originally. ( im assuming because of soldering reasons) so now the specific wire i need to solder has to be soldered directly to the front of the solenoid. is this a possible fix or would it just melt the plastic around it and make it useless. I will see about posting pics as soon as i can find a camera with good resolution

In Topic: Dye matrix LCD (DM3)

26 June 2010 - 11:03 PM

bump

In Topic: Dye matrix LCD (DM3)

26 June 2010 - 05:34 PM

ok well i managed to figure out the problem with it. the o-ring on in the interior of the solenoid some how got loose. but another problem has come up, the 2 wires on the front near the LPR have come off. So the next question i have is it possible to reconnect it to the noid ( such as soldering it)?