Jump to content


Beachasaurus

Member Since 27 Jun 2010
Offline Last Active Jan 31 2012 04:00 PM
-----

Topics I've Started

WTB: bl geardrive asa, proto switch lens, chrono

28 March 2011 - 04:22 AM

Looking to buy:
>Bob Long gear drive on/off asa quick mount in working condition. $25
>new or in excellent condition proto switch thermal lens. $10
>radarchron or x-radar chronograph or another in similar price range. $25
>paintball caddy. $8

prices are negotiable

re-installing pm7 lpr

26 February 2011 - 06:57 PM

Took my lpr out for cleaning for the first time and i guess i should have payed closer attention to how it was previously installed from the factory. There is a set screw right next to the air hole from the hpr to the lpr. This set screw is screwed in and clamps down in a corresponding groove on the lpr. This "groove" has quite a bit of "slop" in that its surface area is larger than the set screw. Thus the lpr can be pushed in to the gun various depths and then be set in place. My question is where exactly is it supposed to be set? Do you line the hole thats next to the set screw up with one of the holes in the lpr? sorry if this is a confusing post.

Pm7 ul frame w/ dm8 ul board - which rend. trigger

28 June 2010 - 12:16 AM

I am in the process of picking up a dm8 ul board and a virtue eye adapter to replace the pm7 ul board in my pm7 ul frame. I did this because plugging the eyes in to the ul frame is ridiculous.

Does it make a difference if i buy the Dm or the proto rendition trigger kit for ul frames?

Thank you.