Jump to content


dibs_on_you

Member Since 17 Oct 2010
Offline Last Active Jul 22 2011 09:08 PM
*----

Posts I've Made

In Topic: best 300 dollar marker in the market right now.

06 December 2010 - 07:29 PM

I would stay away from the G4 because they have a ton of problems, like bolt stick. And they also have pretty bad effiecency, just buy used you will be a lot happier.

true g4 has internal o-rings and those are a bitch to get out, also the g4 doesnt have psp 3 shot as a mode.

In Topic: I Need a REALLY Low Budget Setup

04 November 2010 - 10:53 PM


Yea. like $200-$225
i was thinking
kaos-90
primo-15
ninja 48/3k-50
profiler-60

That's $215. is this setup any good? any suggestions, like used maybe?


MY SETUP OMG NICEE!!!!! (Y) tottally go for it Posted Image its the best setup for the price... 2 things, the feedneck u might wanna keep in mind its a tiny bit loose... and the tank it might start slipping if u dont have a end cap or cover (or hockey tape for DIYPB)


Yea. like $200-$225
i was thinking
kaos-90
primo-15
ninja 48/3k-50
profiler-60

That's $215. is this setup any good? any suggestions, like used maybe?



That's is actually a really good set up, but I would get some V-Force Grillz instead of the profilers...


disagreed, profilers are better and cheaper

stick with profilers i have played with grillz and even though they look fucking awesome they still have that divit in the forehead and u can get blown to bits if u get shot there it hurts like a bitch

In Topic: I Need a REALLY Low Budget Setup

30 October 2010 - 12:19 PM


Dont forget all the other extras like lube and squeegees. Also you can buy a used spyder instead of a Azodin for about 50 and 90-100 for a electro one.

dont buy a spyder and you dont need lube. the kaos comes with a delrin bolt and sure u may need a little lube on ur stryker but im pretty sure your not going to be opening ur gun unless ur stryker o-ring is shreded or if theres a problem with one of ur o-rings. trust me i have an azodin blitz and their pretty much the same except for the electronic board, trigger and eyes

adding to my replay get a synergyzer or piranah or some thing like that. but spyder is a whore they whore their guns to walmart and they put fucking metric fittings on their guns... my point is dont buy spyders i am a spyder owner as well i have a spyder sonix 2001 with a view loader revi and a nitro duck 68/4500. FUCKIN OLD SCHOOL! but still dont buy spyder and dont listen to this guy. i agree with him on the squeegie but u can always use cleanex or u can ask the front desk at the field to borrow a squeegie.

sry not synergizer is the synergy equalizer http://www.amazon.co...r/dp/B003FVWGXK

In Topic: I Need a REALLY Low Budget Setup

30 October 2010 - 12:13 PM

Dont forget all the other extras like lube and squeegees. Also you can buy a used spyder instead of a Azodin for about 50 and 90-100 for a electro one.

dont buy a spyder and you dont need lube. the kaos comes with a delrin bolt and sure u may need a little lube on ur stryker but im pretty sure your not going to be opening ur gun unless ur stryker o-ring is shreded or if theres a problem with one of ur o-rings. trust me i have an azodin blitz and their pretty much the same except for the electronic board, trigger and eyes

In Topic: V35 Halo, Dynasty Vlocity, Halo HATER Board

18 October 2010 - 07:32 PM

Please read BST Rule # 3

When an offer is made on the BST it must always be accompanied with a proper picture of the product. If an offer does not have proper pictures the offer will be snipped and the action logged in the offending user's warn log.

A Proper picture is defined as a picture of your item/items with a sheet of paper that has your TechPB name, the date as well as the word "TechPB" handwritten on it


TechPB BST Rules