Jump to content


Syruslord

Member Since 07 Nov 2010
Offline Last Active Nov 08 2010 02:26 AM
-----

Topics I've Started

Not your average DP G4 Problem

07 November 2010 - 09:43 PM

This might seem like a noobs question, but I havent been able to find an answer on the internet anywhere. But I have just bought a brand new DP G4 and popped the box open. Of course it had your typical air leaks like all G4s, in the macro line and the noid. I fixed both of them by throwing some new macro lines in with new 90 deg elbow clamps, and lubed up the noid with Hater sause. Shot fine the first couple shots and then some thing crazy happened. It went full auto with NO trigger pull. as soon as I started to walk it, it unloaded a whole hopper by itself. I checked the programing and set it to 10 bps, semi auto, and set the ramp point to ten, and it still goes through the whole hopper. the dwell is set to factory setting and the abs dwell is off. If any one has any ideas I could really use your help. I am lost, and the internet itself doesnt seem to have my answer.