Jump to content


Joeisawesome

Member Since 21 Dec 2010
Offline Last Active Jan 05 2012 10:06 PM
-----

Posts I've Made

In Topic: DM7 Trigger Problem!

02 January 2012 - 03:49 PM

I tried that and it didnt seem to work. I'll try again. Thanks for the input :)

In Topic: Little Leak. Need help!

06 April 2011 - 12:29 AM

The poppit valve needs to be clean and dry. If you got some lube on the valve ( unlikely) it will leak. It sounds like it's the oring on the front of the ram. Either way I would replace both orings first then try the poppit valve.


Well then I guess I'll replace it for the weekend. I'll let you guys know if it fixes the problem.

Thanks

In Topic: Little Leak. Need help!

06 April 2011 - 12:08 AM

I would just go ahead and replace the ram orings. Before you do that though, are you 100% positive the leak is coming from the ram, not the poppit?



Well, to be honest I really am not sure, could be a possibilty as they the leak is coming from that gap between the poppet and the ram. Actually now that you said that, I think it may be coming from the poppet. How can I fix the leak?

In Topic: Mediocre Accuracy?

28 February 2011 - 05:03 PM

-Check your velocity, shooting over 300FPS can affect accuracy
-Clean your breech and dont over-lube your bolt, both of these will coat your paintballs in crap
-Clean your barrel
-Only use one kind of paint at once, it sounds stupid but different paint can be heavier/lighter causing a variation in distance
-Check for incosistancy over the chrono, if its bad clean your LPR and regulator and relube them


So I am guessing shooting under a bit could also affect it?

In Topic: Cross-Threaded?

17 February 2011 - 11:17 PM

Etek 3 barrel. It is basically just a shaft barrel...