Jump to content


Joeisawesome

Member Since 21 Dec 2010
Offline Last Active Jan 05 2012 10:06 PM
-----

Topics I've Started

DM7 Trigger Problem!

02 January 2012 - 02:55 AM

It seems that my DM7 now has a problem with the trigger not activating the microswitch as it should. The trigger is a CP Sling trigger and originally when I bought it the gun worked fine, but now the trigger seems to click the microswitch once, but will not retract to its original position. I am unable to completely take off the grip frame as the original seller, who seems to be a completely clumsy tech, had stripped both grip frame screws, therefore making it almost impossible for me to remove them. I REALLY need help as this is keeping me from playing.


Thanks

Dye DM7 Trigger problems :(

02 January 2012 - 02:28 AM

After a day of play on the 30th my gun was shooting great with no problems at all. A little later in the day I let my friend shoot a pod through it, but when he was finished with the pod, something was wrong with the trigger. I took it home thinking nothing of it, but when I went to actually fix the problem I ended up working on it for a couple hours. It seems nothing will fix the trigger problem. I'll list the problems below.

It is a cp Sling trigger, and the trigger will continuously depress the microswitch, making the gun only fire once. The trigger does not retract, so it almost seems unresponsive with no reacting force. I did not take or remove anything prior to this happening, so it could not have anything to do with a careless error.

PLEASE HELP! I need to know if I need replacement parts, or perhaps where I could get this fixed.


Thanks

Little Leak. Need help!

05 April 2011 - 09:06 PM

Hey guys, I have had this Etek 3 now for about 2 months, and I have ran into some tiny, but mostly just leaking. Anyways, When the gun is aired up, a small but noticeable leak is coming out of the rammer. Now I have checked to make sure that the orings on the rammer are sealed -and they are. The leak is loud enough to hear, but the gun can still function, but I have noticed that the efficiency has most definitely decreased. Remember, it leaks both when the bolt is out of the breach, and when it's in. I'd like to get an answer perhaps thanks :)

Mediocre Accuracy?

28 February 2011 - 04:53 PM

Hey guys,

I recently purchased an Etek 3 AM, and to date I have probably put about 2-4 cases of paint through it. Ever since I bought it, I noticed that when shooting I would get pretty bad accuracy, sometimes even wild curves. Now first off, I have tried many types of paint through it, unfortunately ending with the same results. By the way, the gun was purchased brand new. I really want it to shoot within the ballpark of what is considered "accurate".

Thanks for the help :)

Warranty serial number for etek 3?

17 February 2011 - 05:27 PM

Okay, well I recently bought an Etek 3 AM. I just want to know where the hell the serial number is for the warranty card.