Jump to content


TALONMARK

Member Since 05 Jan 2011
Offline Last Active May 21 2011 09:44 AM
*****

Topics I've Started

TALONMARK JET SERIES TANK REGULATOR

11 May 2011 - 04:12 PM

Posted Image

JET 1 TANK REGULATOR W/ ON/OFF - 3000/4500PSI

Material: Aluminum
SPEC: 3000PSI for Alunimum Air Tank ; 4500PSI for Carbon Fiber Air Tank

FEATURES:
1. Integrated body design, completely rebuildable by the user, every regulator is factory tested.
2. Designed with On/Off, contain the high compressed air in the bottle in order to release the tension in the reg and increase the parts life time. Also easy to remove tank from the ASA without on/off built-in.
3. When air leaks from the safety hole indicates the replacement of the O-ring is needed which can prevent unstable air flow/pressure.
4. Dual filter to prevent dirt into the bottle and output.
5. Fill nipple O-ring to insure airtight.
6. Reg cap is easy to disassemble for replacing the internal O-rings.
7. High quality disc springs made by German company - Mubea, provides maximum air flow at a consistent output pressure.
8. Reg length 2-5/8 inches, weighs 5.1oz.


JET 2 TANK REGULATOR MINI - 3000/4500PSI

Material: Aluminum
SPEC: 3000PSI for Alunimum Air Tank ; 4500PSI for Carbon Fiber Air Tank

FEATURES:
1. Integrated body design, completely rebuildable by the user, every regulator is factory tested.
2. When air leaks from the safety hole indicates the replacement of the O-ring is needed which can prevent unstable air flow/pressure.
3. Dual filter to prevent dirt into the bottle and output.
4. Fill nipple O-ring to insure airtight.
5. Reg cap is easy to disassemble for replacing the internal O-rings.
6. High quality disc springs made by German company - Mubea, provides maximum air flow at a consistent output pressure.
7. Reg length 1-6/8 inches, weighs 3.7oz.


JET 3 TANK REGULATOR CO2 W/ ON/OFF - 1800PSI

Material: Aluminum
SPEC: 1800PSI for Alunimum CO2 Tank

FEATURES:
1. Integrated body design, completely rebuildable by the user, every regulator is factory tested.
2. Designed with On/Off, contain the CO2 in the bottle in order to release the tension in the reg and increase the parts life time. Also easy to remove tank from the ASA without on/off built-in.
3. Reg length 1-4/8 inches, weighs 2.3oz.

TALONMARK Template Custom Jersey

18 January 2011 - 07:54 AM

Posted Image

We offer various patterns for you to select from a large collection of stock patterns and colors offered at no extra cost, it is now so easy for you to design your own jersey, minimum order 5pcs.

Check out the pattern select page at: http://www.talonmark.../customize.html

How to select the pattern?
The jersey is devided in 4 parts (Front / Back / Left / Right) and there are 3-4 layers in each part (Base / Decoration / Frame / Theme).
If you like complex style, you can choose pattern from all layers, but if you want the style to be simple, you can choose the pattern only from the base layer with frame layer or decoration layer.

Can't find the right color you like?
All the color can be adjusted later, we only provide basic color at this moment.

What to do after the pattern is selected?
Please download the instruction here: http://www.talonmark...ion-pattern.pdf

Want to provide your own design or ask us to design for you?
For your own design, please read the instruction here: http://www.talonmark...n-owndesign.pdf

To ask us to design for you, please read the instruction here: http://www.talonmark...questdesign.pdf

TALONMARK Template Custom Jersey can be order from your local dealer or make a direct order to us. The minimum order quantity is 5pcs, shipping is free of charge.

Retail Price (M.A.P.): USD$84.95
Material: 100% Polyester
Style: Based on "CONQUEROR JERSEY"
Sizes: S / M / L / XL / XXL

Talonmark Introduces Conquerer Paintball Clothing

06 January 2011 - 03:05 PM

TALONMARK was founded in late 2009. Our aim is to design and manufacture better products through constant research, development, and fine-tuning. Our definition of better product is: better quality, better functionality, more user friendly and fashionable styling that adopts innovative technologies and materials.

"We are not just doing it, we are doing it better."

We would like to kick off the new year by presenting our latest designs of jerseys and pants for paintball sports, the CONQUEROR Series. We will be introducing additional products throughout the year.


Posted Image

Our CONQUEROR JERSEY is fashioned for maximum protection as well as superior comfort in a versatile and stylish design. Ventilation in critical heat zones and extra padding in high impact areas of the upper body keeps you cool and protected while diving, crawling and sliding.

In addition to our basic style and design, we also offer custom jersey design services.

There are three ways to create your unique jersey:

a ) Select from a large collection of stock patterns and colors offered on our website at no extra cost.

It is just so easy now to create your own jersey, check out the pattern select page at: www.talonmark.com/customize.html


b ) Create a jersey design from your own favorite colors and patterns. (Extra charges may apply)


c ) For an additional fee, our professional designers can assist you in custom designing a jersey with that distinctive look for you.



Posted Image

Our CONQUEROR PANTS were developed with versatility in mind as well. Besides providing protection, our multi-functionality design will enhance your paintball experience.

Conquerer pants incorporate specially designed poly/nylon blend fabric for durability and heat reduction.

With removable padding for Knees, hip side, belly, you can now have exactly the level of protection and comfort you desire.

With our removable pants leg design, CONQUEROR PANTS can be use as casual shorts or to cool down after competition.


We are looking for dealers to assist us to promote the brand and products.

We are also looking to sponsor teams.

Check out more info on our website at http://www.talonmark.com


Posted Image

Posted Image

The following picture shows where the mesh fabric is used (yellow area), the ventilation is great, cos heat moves up.

Posted Image

Posted Image

Posted Image


more photos can be found here:
http://www.flickr.co...57625711469798/


The zipper is surely a safty concern. We were aware of that during the design phase. It turned out not a problem after testing. Allow me to explain that by using the picture below.

Posted Image

1. The red line is normally our knee line (unless you wear wrong size).
2. When we kneel, the knee line will start moving down to the yellow line, which make the zipper go up.
3. The purple area shows the major impact when sliding.
4. The zipper head ( B ) is the major concern due to the shape is close to a cube. The zipper bottom ( A ) is flat cause no harm, beside there is a fabric layer between our body ( C ).
5. The white line is the center line on the side, the zipper head is a little left from it. While we do the sliding, the pants leg will move a little backward (less than 5cm), which means the zipper head now moves much away from the impact zone (It is not in the impact zone originally).


As regarding to the turtleneck, it seems many people are interested about the purpose of such design.

The design is obviously for neck protection, I believe people found it useful are mostly had the neck shoot experience. hrhr..

If you do not worry about the neck shoot, you may just flip it over or leave the zipper half way open, so it won't strangle our neck or block the ventilation. Leave the zipper half way open is the best choice I think, it still provide some protection and ventilation.