Jump to content


Member Since 02 Feb 2011
Offline Last Active Apr 25 2014 02:55 AM

Posts I've Made

In Topic: Midnight Geo2.1 F/S only

31 October 2012 - 11:12 AM

gun is sold to kevinsio

In Topic: Midnight Geo2.1 F/S only

29 October 2012 - 11:48 AM

right on, once i have received payment i will ship the gun asap

In Topic: Midnight Geo2.1 F/S only

28 October 2012 - 09:41 PM

pending to kevinsio for 620 shipped

In Topic: geo 2 back check assembly

28 October 2012 - 09:44 AM

Look at the manual for the size

ya that was my first move, the geo2 manual does not show what size that oring is.

In Topic: Geo 2 eyes fault?

26 October 2012 - 09:59 AM

He may need to check the eye wire harness to make sure he didn't pinch or damaged it... Also make sure his board is clean from paint too.

I had a geo2 board that was fried because the previous owner never cleaned the paint that got on it

he dropped me off the gun and i took it all apart checked everything and it all looks good to me. the eyes work fine so i went as far as taking the reg apart as well as the ball check in the solenoid. this is what happens, i air the gun up then turn it on, i then can fire one shot then everyone after spudders and the bolt seems to not be moving all the way forward??? is that bolt stick or something?? any ideas??? and if i shot the gun off and leave it aired up then turn it back on the first shot fires then the rest spudder everytime......

you have bolt stick and on top of that you lost the golf tee in the asa part of the SL3.

ensure that you have the bolt assembly put in correctly along with the solenoid check valve. Lube issues usually dont happen wtih the geo2 at least in my expereince.

read here


how did you come to the assumption that i don't have the golf tee part in my reg elbow? i will check it for sure when i get home and i know its not bolt stick as i took the bolt and can from my own geo 2.1 that works flawlessly and put it in his geo 2 to see if it would work and it did the same shit. so i have ruled out bolt stick, it must be something with the solenoid i am thinking of swapping the one in my 2.1 to his 2 just to see if it works? maybe he needs a new noid?