So I had a tournament a week ago, and i had a break in my chamber (fragile paint no issues no big deal)
And i went to clean bolt due to the fact it had paint all inside and around the bolt and can. I changed the o rings on all of the bolt and can due to the fact who knows when they have been changed, I thought that i was using the correct sized o rings and matched them up with a O ring monkey sheet. Well, the bolt was sticking and just making a puff sound out the front. I re lubed bolt and it was making the same sound. (I already ordered a replacement O ring kit fyi)
So that is one issue, the other issue is someone told me that maybe the solenoid is being blocked and just need to be maintenance. So I took the frame apart got to the solenoid, and there was a lot of debri on solenoid excess lube, and in the catch/net on the solenoid had a lot of debri as well. So All i did was clean off all excess lube and clean the air transfer hole. Im assuming i put the incorrect o rings on the can and or bolt causing the bolt stick issue, but if it is something else. I just would want to know.
Thanks in advance
Just to note, this is a 09 Geo with a GST and Gr-2 kit installed.
irish_maxMember Since 06 Feb 2011
Offline Last Active Jun 29 2011 04:15 PM