Jump to content


dose

Member Since 19 Feb 2011
Offline Last Active Jan 03 2014 09:22 AM
-----

Posts I've Made

In Topic: DM14 - New pics

10 October 2013 - 09:03 AM

 

 

 

Remeber the amazing PM8??

The LPR in the DM14 will be very similar allowing the gun to be a single tube (like the NT).

 

No macroline.

 

Same bolt, same reg and same solenoid. The board will be different to allow for the air transfer tubes inside the gripframe.


The operating pressure will be lower than the current DM13.

Finally we'll have all that's good about the DM's with a smaller profile and less weight!

OR Be just like DAM's bolt which still allows for a single tube design. I'd say there are going with the newer technology. The PM8 was great but there is a reason why they didn't do the same thing to the DM series. 

 

The DAM has the regulator and the bolt in the same tube. It's not the LPR... Different desings. Trust me on this... ;)

 

I know :P. I've owned a PM8 and it was cool the LPR was under the grip frame but it was also a pain in the ass (because I'm clumsy). I just think if it was such a good idea they would have brought it over to the DM series way before the 14. STILL, I'm excited to see what they have developed, maybe an entirely new engine (hopefully).

 

Don't expect any changes in the engine... It's the same bolt (with some minor changes like in the last years), same LPR, same solenoid and board. The big changes is the removal of the macroline and the lower profile from changing the LPR position. The operation pressure will be lower so a smother shot is expected...


In Topic: DM14 - New pics

10 October 2013 - 06:14 AM

 

Remeber the amazing PM8??

The LPR in the DM14 will be very similar allowing the gun to be a single tube (like the NT).

 

No macroline.

 

Same bolt, same reg and same solenoid. The board will be different to allow for the air transfer tubes inside the gripframe.


The operating pressure will be lower than the current DM13.

Finally we'll have all that's good about the DM's with a smaller profile and less weight!

OR Be just like DAM's bolt which still allows for a single tube design. I'd say there are going with the newer technology. The PM8 was great but there is a reason why they didn't do the same thing to the DM series. 

 

The DAM has the regulator and the bolt in the same tube. It's not the LPR... Different desings. Trust me on this... ;)


In Topic: DM14 - New pics

09 October 2013 - 05:46 AM

Remeber the amazing PM8??

The LPR in the DM14 will be very similar allowing the gun to be a single tube (like the NT).

 

No macroline.

 

Same bolt, same reg and same solenoid. The board will be different to allow for the air transfer tubes inside the gripframe.


The operating pressure will be lower than the current DM13.

Finally we'll have all that's good about the DM's with a smaller profile and less weight!


In Topic: Cheap PM8 F/S

27 November 2012 - 11:00 AM

is this still avaiable?

In Topic: Tournament Video RLX 2012 - Portugal

27 November 2012 - 10:48 AM

The new season is just around the corner and we want to go the extra mile with our videos.

With that in mind please let us know what do you want to see in 2013 and what sugestions do you have.

- Longer or shorter videos
- Barrel cam videos
- Bloopers
- Different music
- Trainning drills
- Reviews in English (you can visit our youtube page to see our reviews - only in Portuguese ATM)
- ....


All opinions are crutial so please leave some feedback!


Thank you!!