Jump to content


TheBananahKing

Member Since 02 Mar 2011
Offline Last Active Jun 29 2011 12:56 AM
-----

Posts I've Made

In Topic: GOG envy help.

27 May 2011 - 06:16 AM



Ok I'm probably gonna repeat there answers,
Your envy is set stock to run co2 if u use hpa change the dwell,
Look in the manual for info
Make sure there are no cuts

If all else fails take it to a local store or field


Im useing co2 and thats what its set for.... and cuts?

he means cuts in the hoses.

my advice: ummm.. check all your orings including your tank (i know it is probably not the tank but it wouldn't hurt) and if you can not find it anywhere then maybe its the regulator. you will have to take the regulator apart but you will need a certain tool here is mike's video on it

http://www.youtube.com/watch?v=-N7uOv04RYg


already checked all orings except for the regulator the sound doesn't seem to be coming from there but what might be wrong in there?

In Topic: GOG envy help.

26 May 2011 - 09:27 PM

Ok I'm probably gonna repeat there answers,
Your envy is set stock to run co2 if u use hpa change the dwell,
Look in the manual for info
Make sure there are no cuts

If all else fails take it to a local store or field


Im useing co2 and thats what its set for.... and cuts?

In Topic: Gog envy help.

26 May 2011 - 06:19 PM

Ok thanks everyone for your help but unfortunately i purchased Sleek, re-lubed my gun, checked everything and it still leeks. the sound of the leek has changed however. it has changed from a hissing to a low breathy echo if that makes any sense, i am hearing this noise from my feed neck. i am going paintballing this weekend and would reallly like some help. thanks

In Topic: Gog envy help.

18 May 2011 - 04:44 PM



I knew it was a lube problem. Most problems in life can be solved with a bit of lube.

Use dow 33, sl33k, or gr33se as mentioned by mustangs.

:tup:

:tup:

NO don't use oil! The envy needs lube not gun oil. It's a spool gun so you should be using Sl33k, GOG Grease or Dow 33 for the envy. I don't mean to be an ass, but did you even read the manual? lol Read your manual, it should say the lube I mentioned. If anything, the reason it's leaking is because you are using oil and not lube

:tup:


Did you get it to work yet?


need to get the lube which is best?

In Topic: Gog envy help.

17 May 2011 - 06:14 PM

NO don't use oil! The envy needs lube not gun oil. It's a spool gun so you should be using Sl33k, GOG Grease or Dow 33 for the envy. I don't mean to be an ass, but did you even read the manual? lol Read your manual, it should say the lube I mentioned. If anything, the reason it's leaking is because you are using oil and not lube


K thanks.