Jump to content


redliness

Member Since 17 Mar 2011
Offline Last Active Feb 03 2012 02:51 PM
-----

Topics I've Started

reg halves stuck together

28 March 2012 - 04:44 PM

picked up a used g6r and the hpr halves wont unscrew. ive tried various things to grip it with and even with a good grip cannot unscrew them with all my strenght. Obviously im taking it up with the seller, but maybe somebody here has an idea until then.

i dont see how you could possible cross thread them and completely screw it together.

:rolleyes:

etek 3 quirks

11 August 2011 - 06:24 PM

I got a used Etek 3 LT and when i gas it up the bolt cycles once. (completely forward and then back)

Also after degassing it, its still holds enough pressure to fire once.

never seen any other marker do this.

zero tuning

30 March 2011 - 05:00 PM

I recently have been trying the ZERO on my blitz with mixed results. I tried turning the reg screw in all the way, then backing it out ~4 turns and backing out both the striker and valve springs all the way. the gun will shoot great for ~10 balls then it will go full auto and dump all my air. And once it blew my striker o-ring, i think i had the pressure to high and the valve spring too tight. Ideally i want to be shooting 280fps but i dont have a chrono readily available yet. :rolleyes:

So im hoping some of you Zenith owners can give me some stable baseline settings. (back out the reg so far, tighten the valve spring so far.....etc)

thanks