Jump to content


Member Since 08 Jun 2011
Offline Last Active Nov 05 2011 06:17 PM

Posts I've Made

In Topic: 2k4 vs 2k5

04 September 2011 - 12:50 PM

the 2k5 superstock is a pretty good gun it's not that bad and the difference is that the 2k5 has a different body design and comes stock with the SF board and the 2k4 is a stock mechanical autococker in all there both pretty good

In Topic: 04 prostock problem

23 July 2011 - 02:23 AM

<br />Sorry to sound noobish but I've never heard of an exhaust valve in an autococker. what part Is that?  <br /><br />I am pretty sure that the new valve was put in correctly.<br />

the exhaust valve is that little screw thing that you seem on the body of the autococker when you remove the trigger frame you remove to see if your valve is in the right way

In Topic: What kind of gun is this?

22 July 2011 - 02:39 PM

it's a brass eagle stingray

In Topic: 04 prostock problem

22 July 2011 - 02:33 PM

<br />actually i think its the new valve, when i push on the cocking rod, theres no give to it like there was before, maybe something in backwards?<br /><br />i'd like to do the open bolt design but would it be possible with an e blade cocking noid? <br /><br />and sastly, does ayone know where i can get a replacement E2 screen and other e2 parts? the only other part im desperate for is an angled asa port that will fit the rounded 04 body. (id prefer dust red too.)<br /><br />i'll try to get pics up later tonight of what i have so far... <br /><br />thanks for all the help guys.<br />

you put in a new valve ? well then did you remove the exhaust valve to see that it was put in the right way?

In Topic: 04 prostock problem

19 July 2011 - 10:50 PM

Is your bolt upside down?
Adjust your hpr
Is your tank full?