Jump to content


Seward

Member Since 12 Oct 2008
Offline Last Active Feb 18 2013 02:28 PM
-----

Topics I've Started

Hyper Frame

04 January 2011 - 11:26 PM

I was just wondering about hyper frames. Ive heard about them and seen one on an old cocker but wondering y there not on more.

CCI Phantom question

14 December 2010 - 08:51 PM

Hey Im thinking of getting a phantom but the one I found has a right feed body. I was wondering if I could turn this into a stock class marker without putting a feed tube the 45 degree adapter. I was also wondering if that feed neck unscrews or comes off. I was wondering all this because i want to either run it as stock class or modify a pod and figure out a way to make it feed from a pod so the keeps an overall low profile

Traccer vs. KP

06 December 2010 - 08:21 PM

Looking at getting a pump gun. Just wanted some outside opinion

M1919 Browning machine gun

02 November 2010 - 10:01 PM

This saturday im going to be changing my spyder into a Browning 1919.
Im planning on making the body out of wood painted and then something overtop of the paint to make sure that the wood doesnt get stained from getting hit. Im making a box hopper out of an ammo box and an eggy 3 i have laying around. The last thing im going to do is make the barrel out of pvc piping (two pieces of pvc piping one drilled to give it that shroud look and the inner one just so it doesnt look empty).

One problem I have is what should i put over the paint or wood so it wont stain when it gets shot?
Wat kind of cheap tubing could i get at a local hardware store for a the box hopper?
and I have to drill the pvc piping to make it look like the barrel shroud im planning on just using a drill good idea or bad idea?

Plz any ideas to make it better would be much appreciated

2006 interceptor

02 August 2010 - 07:25 AM

Hey
I picked up a 2006 interceptor with the was board but it did not come with a manual and the dwell is set down to low. If someone could tell me how to reset the board to factory settings it would be greatly appreciated or if someone knows how to change the dwell i would take that to.