Jump to content


Member Since 08 Feb 2013
Offline Last Active Mar 05 2015 09:59 AM

Posts I've Made

In Topic: Rotor Or Prophecy?

02 March 2015 - 09:44 AM

My rotor has jammed twice in the 3 years of use, and one of those times was because 2 balls had gotten wet and were stuck together, nothing will feed that, and you wouldn't want it to anyway. The rotor vs prophecy debate is like the import vs muscle debate with cars, except there is less difference between the actual products.

In Topic: Ninja Reg Stuck

02 March 2015 - 09:40 AM

If you have to ask, you should probably take it to a shop. Usually I am in favour of learning to do it yourself, but for tanks I think it's a case of better safe than sorry.


If you really want to do it yourself then I am first going to say the safety bit; make sure your tank is completely empty! Ok, now that that's out of the way, I am assuming that the stuck screws you are talking about are the bonnet screws in which case you have 2 options:

1- You can work on breaking those screws loose

2-You can replace the reg


If you choose 1, you may need to use some kind of penetrating lubricant, but if you do, you need to make ABSOLUTELY SURE that none gets inside the tank, or you need to make sure you get all of it out of the tank before you ever fill it again. You could be betting your life here!


If you choose 2, there have been many threads talking about removing regs before, check out one of those.

In Topic: How do i improve my accuracy

27 February 2015 - 11:36 AM

Clean your internals, buy high quality paint, and practice. That's about all there is to it. your .689 is fine. It's a fairly common overbore dimension and it should never run into the bore matching issue that Hitman described above.

In Topic: So what's a good mask for a intermediate player

27 February 2015 - 11:34 AM

^Not to mention cheaper than many others and easy to find other thermal lenses if you want say a yellow lens for indoor/grey days, and a mirror/tint for sunny days.

In Topic: Mask for guy with a big head

25 February 2015 - 03:17 PM

V-Force Profilers, E-Vents, and Proflex would be my first suggestions for a bigger head. i4s, Vios, and the KLRs all seem to be quite small. They may be comfortable as long as you are ok with your chin sticking out... Grills provide a bit less coverage than the profilers, but similar to Profits. I haven't really seen E-Vents getting sold new for a little while, but I would consider them to be kind of mid size as well.