Jump to content


mstewart336

Member Since 20 Feb 2013
Offline Last Active May 24 2013 12:30 AM
-----

Topics I've Started

Semi, Burst, or Ramping..

04 May 2013 - 06:11 PM

Alright, so I'm programming my MacDev Cyborg w/ Tadao board and don't what fire mode to use..

Options:
1. Semi-Auto Uncapped ROF, which I'm guessing most prefer..
2. Semi-Auto Capped ROF, just throwing this one in - (personally I think 1 or 3)
3. PSP Burst, The first 3 shots of a string are semi-automatic.
After the 4th shot the marker will fire 2 or more shots per pull as long as
the user continually pulls and releases the trigger.
If the trigger is released, the marker will stop firing immediately.
If the trigger is not pulled again within 1 second of release, the 3-shot
semi-automatic count starts over.
4. PSP Ramping, The first 3 shots of a string are semi-automatic.
After the 4th shot the marker will add shots as long as the user fires
faster than the ramp start setting. For example, if the ramp start setting
is 5, then the user must pull 5 times per second or faster for the
software to add additional shots.
If the trigger is released, the marker will stop firing immediately.
If the trigger is not pulled again within 1 second of release, the 3-shot
semi-automatic count starts over.

Tampa - FL PB Fields

20 February 2013 - 07:49 PM

So, I'm new to paint balling and was wonder from those who live in Tampa or Florida what are the best fields around to go to?