Jump to content

J manwill

Member Since 26 Mar 2013
Offline Last Active Jul 11 2013 12:50 AM

Topics I've Started

Dye rotor coloring

08 July 2013 - 04:28 PM

I would really like to have a purple rotor with a green color kit. Unfortunately the dyetree purple has lots of pink in it, making it illegal in the league I play in. How could I go about having the shell purple? Ive heard of hydro dipping but nobody does it and it is really expensive. Any other ways? Dyeing the same way as spires? Prefer it to be a home project too.

Psp MAO dynasty vs ironmen

02 June 2013 - 02:08 PM

I missed the ironmen vs dynasty game but saw the interviews after. What was the deal about shooting a dead player? Dynasty had to break out with 2 guys? What happened?

Empire axe detent springs and feedneck

25 May 2013 - 03:09 PM

I am getting my axe anodized and need to get the springs out and eventually back in to the detent covers. How do I do this without ruining the springs? I would prefer to use the same ones again after (not bending them)
Same goes for the feedneck. I tried the tape around a socket wrench, but it didn't work. I tried it again while applying heat, still didn't work. Any ideas?

why buy another mask?

13 May 2013 - 09:09 PM

I saw a local add for a great deal on a pair of grillz and a z2 speedfeed package. I was intrigued, but i am curious as to why lots of people have multiple masks. I recall somebody on nation had literally a mask sale with 14 masks... (one of the was a joy division I4 :o but anyways) Do you use one for different weather? speedball? woodsball?

Tipx leaking down the barrel

01 May 2013 - 09:11 PM

The tipx i just bought used, which was essentially brand new, was working well when the local seller was at my house and i was shooting it with 12g co2's. He told me that if i use HPA i would have to crank the velocity way up. So i did and adjusted the pressure relief valve so that it wasnt letting off air from the velocity screw. I then aired it up in my basement after he left and it was leaking down the barrel. I asked him if he knew any "common culprits" and he said try the air transfer tube orings. I oiled the orings on both tubes --> still leaked, I then tried grease on the same orings -->leaking a tiny bit at first (less sound) but when i shot it it started to hiss pretty good again. I am using a ninja pro 68ci outputting 800psi and the tank was a bit low. I dont think it is because of the low pressure because it is a very small leak and does not sound like a "low pressure leak" (if you know what i mean). I was planning to change out the orings next to see if that works. I just thought this might save me some time if somebody has had this problem with theirs and know what may be wrong with mine.