Jump to content


Member Since 24 Jun 2013
Offline Last Active Jan 02 2014 11:32 AM

Topics I've Started

Bob long victory not airing up.

31 December 2013 - 01:10 PM

Hey guys, i went to the feild today to want to play but my gun had a few problems.  At first the gun had a leak near where the gun frame connects and theres a little o ring. I got that replaced and it worked and chronoed.  The field i play at requires 240 and i was at 270 so i turned itd the wrong way and bumped up to 300 shot a few times cranking back down the other way.As i shot a few more rounds the air pressure started to drop and then ended.  It seems like there isnt any air getting into the regulator at all.  When i stick the HPR/lpr tester in it all reads 0.  At first i had the LPR set to about 75 and shot 170.  I tried switching new batteries but nothing worked. THere are no leaks from what i can hear and feel, I think all the pressure is stayin in the grip frame area and not going thorugh the rest of the gun.  

Second question i have is the victory to my understanding runs on low pressure tanks.  I took shims out of my ninja leaving 1 or 2 silver shims in, took out a red single red.  At that point the lpr would only hit 40 and not go any higher so i put the red shims back in that the problem occurred. Should i just leave the tank at its normal output pressure or tank shims out? 

Where to play paintball in Toronoto?

06 December 2013 - 08:59 PM

Hey guys, I'm going to Toronto soon and bringing my own gear.  I looked a few fields and saw that a box of 2000 is 100+ some even 140.  Is that average price??  Wheres the best place/priced to play indoor?  I thought paying 70+ for a case of 200 was expensive...

Would it be better to buy ur on paint then go to a BYOP field? or is paint still expensive at retailers?

Ways to make your paintball tank just a little bit longer?

27 September 2013 - 11:43 PM

Hey guys so i have a 68/45 tank and i want to make it just a bit longer.  I have sports grip tape at the end but i wanted to be a little longer but i dont wanna add more layers. My gun doesnt have a rail and i dont think there are rails or anything for a microlineless gun.  Anyone have any cleaver ideas?

pressure tester for bob long marq victory. DIY?

19 September 2013 - 09:23 PM

Hey guys just picked up a nice bob long marq victory for a super cheap price. Guy felt bad that he lost the pressure tester so he gave me the gun for dirt cheap.  I know for the vice and proteges you can make your own LPR testers.  Is it possible to make one for the victory? I know they sell for 50 bucks but just curious if there are any DIY.  I assume the G6r testers dont work either?

New dye dm6 techt l7 bolt problems

01 September 2013 - 11:15 PM

Hey guys so i just picked up a dm6 and i have a techt l7 bolt in it and it has a slight leak and im thinking its the top hat o ring.  Do you guys know what oring size it is that fits in there. Techt claims that they sell a special made o ring for it.  Also is there suppose to be spacers for the bolt? is having spacers better?