Jump to content


coolinthewoods

Member Since 26 Oct 2008
Offline Last Active Apr 22 2010 09:50 AM
-----

Posts I've Made

In Topic: how do you make a TM7 shoot?

21 June 2009 - 04:40 PM

Yeah eyes are working and we made sure their was a paintball in the breach. the solnoid huh? that would suck.

In Topic: One Stop Topic for Paintball In Alaska

28 March 2009 - 12:07 AM

Your info is slightly out-dated, you pasted it from a Pb nation or from spec opps site. If your going to put up info on are State, do it correct. Half the places you named don't even exsist anymore.

In Topic: EOS Bolt

20 February 2009 - 04:10 AM

I have a new EOS! It is still within the 1 year warranty. Just wanted to get some advise from anybody that may have come across the problem. I go to take out the bolt after a day of paintball and the thing seriously takes a lot of elbow grease to just get it out. I literally have to take a hard rod or something sturdy and put in down the breech of the gun and push very hard to get the bolt to come out the back. It almost breaks the o-ring every time. Its the O-ring on the chamber not the bolt. The gun shoots perfect all day though. I relube it and put it back in carefully and it works great. Did not know if anyone knew anything about it! Thanks


Mine seems to slide out with little effort. I would call or email Smartparts. mines only few months old.

In Topic: Having problems with my 360 QEV

12 February 2009 - 03:13 PM

Where are you installing it to? There are 3 hoses on the inside. The long, medium, and short. It needs to be screwed on to the medium hose in place of the banjo and the hose will have to be shortened a little.


I thought it was the front fitting, Im I wrong on this? I pulled my marker out and looked at it again... It it suppose to be the fitting below the bolt? or the the one on top of the guage? Im going to fell dumb now if Im trying to install it in the wrong fitting.

In Topic: Keep On getting emails from tech-pb

19 November 2008 - 01:08 AM

Me to.