Jump to content


Member Since 26 Oct 2008
Offline Last Active Apr 22 2010 09:50 AM

Topics I've Started

how do you make a TM7 shoot?

21 June 2009 - 02:13 PM

My friend just bought a new TM7 from a local shop and brought it to are field to play with. He stoped by another place and filled his new compressed air bottle and headed for my place. He put the batterie in and slid the feed neck on and hooked up the air and put paint into the hopper. He then took it off safe the light changed from red to green and nothing happens when you pull the trigger. tried another bottle nothing works. Help for my friend please. Jesse

Eos issues with oled board.

19 April 2009 - 03:52 PM

Played are first game yesterday and out of ten games my marker jamed nine times. the paintball would get stuck in the detends. I would break out of the start box run for the snake dive in and start shooting, the marker would start flashing orange, I would have to unscrew the barrel and push the ball back and rescrew the barrel back on, clear it, and play on. If im playing defense in the back it would start shooting ok but jam up. Im running 200 psi in the gun, the dwell is at 15, debouce is 00.1, anti mech bouce is on low, eye delay is 00.1, antibreeech bouce is on high, anti bolt stick is off, rate of fire is on max, eyes mal rate of fire is 08. I had fly-in detends, but I put my stock ones in and had no change, I also had a L7 bolt in it, put the stock firebolt back in it and had not change. My Halo has the v35 board and I have it set at three flashes.

Whats next for my EOS?

06 April 2009 - 03:03 AM

Im the type of guy who can't keep my stuff stock. I have to add the next best thing to it. I have a brand new EOS I purchased in November, It has a Virtue OLED board, 360 QEV, TechT Detends, TechT X7 bolt,Virtue lazer eyes. What should I do next? My Birthday is in a two weeks "31" (Im getting old) So I have to wait to buy a new hopper. thanks Jesse

Having problems with my 360 QEV

09 February 2009 - 11:05 PM

I installed my new 360 QEV from smartparts on my EOS and the hose is too loose and it leaks bad under pressure. Is there a fix for this? Do they make smaller hoses? Help me out please. I tried my spare hose and it fits the same.

Eos help

26 November 2008 - 02:08 AM

Hey all, I bought a EOS this fall and was trying to set the Dwell and a few other options and I can't figure it out. Could someone download the manual from smartparts or from this site and send it to me. My computer wont download anything so if you could help me and not send me a file that would be great. Thanks Jesse