Jump to content


ScaryJ

Member Since 03 Jan 2009
Offline Last Active Feb 07 2009 11:33 PM
*****

Posts I've Made

In Topic: LP Air tanks

07 February 2009 - 11:31 PM

Do you have an angel?



I'm planning on getting 1.


I use a LP tank on my Vice. So if you want to switch so you can switch between vice and angle go for it.

In Topic: protege or Gen 4 E-Model Intimidator

07 February 2009 - 11:15 PM

Protege (which is a gen 5 ) vs Gen 4? Well Protege of course. Unless BLAST decided to un improve in the newest gen intimidator

In Topic: Vice velocity problems

06 February 2009 - 06:41 PM

What is your LPR, Dwell, and ABS at?


Definatly the place I would start on my Vice.

After that re lube. If marker is dry or o rings are bad you could have this problem as well.

In Topic: vice leak

06 February 2009 - 06:38 PM

after you take apart make sure you clean out to make sure you have no grit in marker before you lube and put back together. Some times your tank will get grit in it when you fill it at field and then as you use your gun the grit can get into marker from your tank.

In Topic: Vice leaking

06 February 2009 - 06:34 PM

I would take apart re-lube and check all o rings for damage and reset LPR and pressure and if still leaking definatly call BLAST.